4 Channel Wireless VISEC Surveillance System

Let's look today at another type of complete video surveillance system, a 4 channel wireless VISEC surveillance system. This system turns your existing home or office computer into a complete video surveillance system in almost no time at all. The key to this system is the powerful VISEC video surveillance software, which gives your existing computer system all the power of a DVR, but at a much lower cost. This system includes the VISEC software, 4 day/night color wireless bullet cameras, 4 2.4 GHz video receivers, a GrabBeeX (converts analog video to digital USB format), and a color quad. Let's take a closer look at the individual components in this system.

The VISEC surveillance software is the most powerful software available for turning an existing PC into a video surveillance system. VISEC can record up to four cameras at once to your computer hard drive. You can view your surveillance system from any location in the world via the Internet. You can record all video activity, or just record when motion is detected. Simply use your computer's IP address to log on securely and view live or past video. In motion detection mode, VISEC can be programmed to send you an alert to your email, cell phone or PDA when motion is detected. VISEC is extremely easy to install and configure, setup of the software takes only 5 minutes.

The security cameras included with this system are the BC-30GC day/night color wireless bullet cameras. This color bullet camera has a high quality digital CCD chip that automatically switches from color to black and white in low light conditions. And to enhance low light visibility it has 12 built-in high output infrared illuminators. It features a hood for outdoor mounting and is fully weatherproof. Here's the specs on this professional security camera:

- Image Sensor 1/4” COLOR CCD
- Resolution 420 TV Lines / 470 TV Lines
- Min. Illumination 1 Lux f2.0, 0 Lux IR ON
- Lens 4.3mm F1.8 Board
- Power Required DC12V ± 10%
- Current Consumption 110mA (IR Off)
- 260mA (IR On)
- 320mA Max

Take note of the fact that this camera can record images down to 0 LUX (that's total darkness) with IR mode on.

The system also includes 4 high-quality 2.4GHz video receivers to receive the signal from the wireless cameras. The 2.4GHz frequency provides for maximum signal distance with minimum interference. Signals can be transmitted through walls and doors because of the high frequency operation.

This video surveillance system also includes a GrabBeex, which converts the analog output of the 4 video receivers into a digital USB 2.0 format for easy connection to your computer. Simply plug the output of the quad into the GrabBeex and plug it into any available USB port. This is all that is required to connect the cameras to your existing computer.

The system also includes a color quad, which allows you to display and record up to four cameras in a single image frame. So you can look at the output from 4 cameras at the same time on one computer monitor, and be recording the images at the same time.

As you can see, this is truly a professional video surveillance system and it comes at an unbeatable price. For more information on the 4 Channel Wireless VISEC Surveillance System, and details about pricing and where to purchase, see the following link: 4 Channel Wireless VISEC Surveillance System